HOME
FEATURES

FULL POWER ?
AND STILL EU-COMPLIANT

NEW IN PROGRAM:
Ergoline?s Optimised Performance concept has set new standards for 3.0 W/m-compliant sunbeds, giving you substantially improved tanning results without an increased risk of sunburn.

Find out more here to Optimized Performance






Modified low-pressure UV lamps for the body as well as Ultra Performance Plus facial tanner technology with glass reflectors and additional 25W low-pressure lamps with specialised filters gives a UV lamp combination that still complies with the 0.3 W/m standard. Ultra Performance Plus technology is based on the same UV components as you will find in Ergoline?s SUNANGEL models.

Software-controlled power settings make it easy and convenient to adjust your optimized 3.0 W/m sunbed to any Standard that applies in your country ? giving your investment maximum protection and flexibility. Due to our enhanced technology, Ergoline sunbeds retain much higher resale values!

NEW
All of our sunbeds with the Optimized Performance Label are optimized for the 0.3 W/m (erythema) EU standard; you can differentiatet by the ?S? in the model name.


THE FACTS

  • Innovative UV technology and a completely reconfigured UV system gives you greatly improved tanning results while complying with the EU 0.3 W/m standard.
  • The time for pigment to darken and regenerate, while preventing sunburn, plays an essential role in the final tanning result.
  • Sunburn risk is as low as in any ordinary 0.3 W/m sunbed.
  • Pigment starts to darken almost as fast on a 0.3 optimized 0.3 W/m sunbed as on a 0.6 W/m sunbed.

ORDINARY 0.6 W/M SUNBED PRIOR TO THE EU STANDARD


While pigment regeneration commences somewhat later compared to a 0.6 M/m sunbed, the skin has much more time to regenerate pigment cells on a 0.3 W/m sunbed.

Example:
A customer with skin type 3 without a tan will have around ten minutes for pigment regeneration before reaching the sunburn threshold on an optimized 3 W/m sunbed, as opposed to around three minutes on a 0.6 W/m sunbed.
That means that the skin has around three times the period to form new pigment cells on an optimized 0.3 W/m sunbed.

RESULT:
Three times the period to regenerate new pigment means three times the pigment available for colouration without the risk of sunburn.


ORDINARY 0.3 W/M SUNBED


Compared to an ordinary 0.3 W/m sunbed, pigment regeneration and tanning will start much earlier on an optimized 0.3 W/m sunbed from Ergoline.

Example:
A customer with skin type 3 without a tan will take around four minutes and twenty-four seconds for pigment to darken on an optimized 3 W/m sunbed, as opposed to around six minutes and twelve seconds on an ordinary 0.3 W/m sunbed.
Additionally, the effective UV range is far more concentrated for actual pigment regeneration and colouration on an optimized 0.3 W/m sunbed.

RESULT:
A more effective tanning period together with UV-light frequency ranges more concentrated towards actual tanning will increase pigment darkening and regeneration on an optimised 0.3 W/m sunbed, giving your customers a more luscious tanning effect than you could expect on an ordinary 0.3 W/m model.



HOME » BRAND » UV-EXPERTISE » FULL POWER ? AND STILL EU-COMPLIANT